Stamped Concrete Design
Stamped concrete creates a timeless, fashionable look for your place. The imprinted surfaces need less maintenance because of their resistance. It is popularly applied to pool decks, patios, driveways that set a grandeur on your yard.
Stamped concrete comes in various designs. It creates a look-alike structure of more expensive pavers, natural stones, and bricks. It is long-lasting when sealed and taken care of.  However, stamping concrete is done with expertise. DIY is possible, but only if you are knowledgeable.
The working process affects a huge part of the output. Still, the quality of the materials used should not be neglected. The choices of design and patterns need experts. It also demanded the use of different products for enhancement and maintenance.
Liquid Colors
Liquid colors for concrete contain Iron Oxide pigments. Its usage has increased the demand for quality control. Better technology was developed for the concrete industry. The mixing procedure is a very sensitive state where there are rules to follow. One should use a clean container, non-slurry water, and no recycled materials. It requires speed maintenance for consistency. About 40% load is the least capable of a mixer for good color distribution. A measured ratio of the mixture should be used, so the color mixture is the same. Before use, a test slab is required to determine output. Calcium chloride is restricted. The result would be the discoloration in the applied color. Good drainage and compacted cement also affect the outcome of the job.Dirt, plastic, and wood could also affect equal curing. High temperatures dry the mixture quickly. The subgrade should be dampened for moisture without letting the water pool. Fogging or spraying is a definite, No, specifically, at the initial curing period of vertical applications. The area of application should be clean as well. Covering the surface with plastic would cause uneven curing and coloration.Released Agent/Harder Colors
There are other materials used to apply in cemented surfaces other than paint. Some are manufactured to amend specific issues for better outcomes. Each classification is available in different colors that will match your liking.Â
The brick form provides many coloring materials for concrete. Below are some of their products:
Color Hardeners are for new and freshly made concrete use. It works with imprinting tools for the clean and enhanced appearance of the project. Color hardener makes the concrete resistant to weathering, abrasion, and wear.
Antique Release is a powdered color that creates a waterproof barrier on the surface. It adopts the look and feel of natural things. It can also stand sunlight rays.
Antique is a water-soluble preserving agent. It is used best for highlighting stamped concrete surfaces.
Cem-Coat is for unsealed and existing interior or exterior concrete use.
Overlay Liquid Colorants are non-hazardous and water-based formulations used for concretes. The form makes it easy to clean it up.
Tinta Seal enhances and corrects existing cemented surfaces for a better appearance.
Patterns
Patterns for stamping concrete are unlimited to your ideas. It is available on the different materials you can use, such as brick, stone, and slate.
When it comes to patterns, precision is the hit target. The measurements should be equal and properly aligned. The materials used should also be durable. The weight distribution should be studied for comfortable maneuver and balance.
Contact an Expert Today
A stamped concrete offers a variety of inspired designs that you can customize. It is classy yet less costly. Maintenance requires cleaning and sealing from periods. It is also less slippery than the natural concrete, but of course, water hits different.
If you think stamped concretes are for you, then take a step towards living in a high-end structure!
Check out our resources below for more information!
Trying To Decide Which Stamped Concrete Option Is The Best For You?
